■ Setting the release time
This sets the amount of time until compression stops after the input
signal goes below the threshold.
5.
Use
and
to select
Release Time, and press
6.
Use
and
to adjust
the time, and press
HINT
This can be set from 1 to 500 ms.
.
.
■ Linking the limiter
The line output limiters can be linked or applied independently.
5.
Use
and
Link, and press
6.
Use
and
Off, and press
Setting
Off
Separate limiter operation.
Link limiter operation. If the signal for either linked signal reaches
On
the threshold, the limiter will operate on both channels.
119
to select
.
to select
.
Explanation