Zoom F6 Operation Manual page 97

4.
Use and to select
Input Link, and press
■ Setting stereo links
Stereo
Use and to select Stereo, and
press .
MS
Use and to select MS, and
press .
.
Setting
Stereo When stereo-linked, inputs are handled normally.
When stereo-linked, signals from mid-side mics are converted to
MS
ordinary stereo.
NOTE
• • When stereo-linked, odd tracks are handled as left and even tracks as
right channels.
• • When MS stereo-linked, odd tracks are handled as mid signals and even
tracks as side signals.
HINT
When MS stereo-linked, the method to balance mid and side is according
to the recording mode as follows.
• • Float (32bit): Use
for each track to adjust the mid/side balance.
• • Not Float (32bit): Use the input level for each track to adjust the mid/side
balance. (See "Adjusting input levels →•P. 25.)
97
Explanation