Output Settings; Setting Signals Sent To The Headphone Output - Zoom F6 Operation Manual

Output settings

Setting signals sent to the headphone output

Signals sent to the headphone output can be set to either prefader or postfader for each track.
Saving 10 setting combinations (Setting 1–Setting 10) it is possible.
1.
Press .
2.
Use and to select
OUTPUT, and press
3.
Use and to select Head-
phone Out, and press
.
.
4.
Use and
Routing, and press
5.
Use to select
the desired setting.
NOTE
Use on any screen to cycle through Settings 1–10.
106
to select
.