Appendix; Troubleshooting - Zoom F6 Operation Manual

Multitrack field recorder
Hide thumbs Also See for F6:
Table of Contents

Advertisement

Appendix

Troubleshooting

If you think that the
is operating strangely, check the following items first.
■ Recording/playback trouble
◆ There is no sound or output is very quiet
• Check the connections to the monitoring system and its volume setting.
• Confirm that the volume of the
◆ Sound from connected equipment or inputs cannot be
heard or is very quiet
• Check the input level settings. ( → P. 25)
• If a CD player or other device is connected to an input jack, raise the out-
put level of that device.
• Check the input signal monitoring settings. ( → P. 76)
• Check the phantom power and plug-in power settings. ( → P.• 78,•
P. 92)
• Check the headphone and line output routing settings. ( →  P.  106,
P. 109, P. 110)
◆ Recording is not possible
• Confirm that the status indicators are lit red.
• Confirm that the SD card has open space. ( → P. 171)
• Confirm that an SD card is loaded properly in a card slot.
• If "Card Protected!" appears on the display, the SD card write-protection
is enabled. Slide the lock switch on the SD card to disable write-protec-
tion.
is not too low. ( → P. 33)
◆ The recorded sound cannot be heard or is very quiet
• Confirm that the volume levels of the tracks are not too low. ( → P. 52)
• Confirm that the status indicators are lit green during playback.
■ Other trouble
◆ Computer does not recognize it even though it is connect-
ed to the USB port.
• Confirm that the operating system is compatible. ( → P. 136)
• The operation mode must be set on the
. ( → P. 138)
ognize the
183
to allow the computer to rec-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents