Zoom F6 Operation Manual page 126

■ Outputting timecode only when recording
Whether or not timecode is output from the TIMECODE IN/OUT jack
when recording is stopped can be set.
3.
Use and to select
Mode, and press
4.
Use and to select
TC Out, and press
5.
Use and to select
Rec Only, and press
.
.
.
NOTE
• • Timecode will continue to be output when recording/playback is paused.
• • This cannot be set when Mode is set to Off, Ext or Ext Auto Rec.
HINT
Always: Timecode is always output regardless of the recorder status.
Rec Only: Timecode is output only when recording.
126