■ Setting the threshold
This sets the base level from which the limiter operates.
5.
Use
and
to select
Threshold, and press
6.
Use
and
to adjust
the setting, and press
HINT
This can be set from −16 to −2 dBFS.
.
.
■ Setting the attack time
This sets the amount of time until compression starts after the input
signal exceeds the threshold.
5.
Use
and
Attack Time, and press
6.
Use
and
the time, and press
HINT
This can be set from 1 to 4 ms.
118
to select
.
to adjust
.