Setting The Mode - Zoom F6 Operation Manual

■ Setting the mode

The following types of settings can be made.
• Whether the generates timecode or receives external timecode
• Whether timecode continues running or not when not recording
3.
Use and to select
Mode, and press
4.
Use and to select
Mode, and press
5.
Use and to select
the mode, and press
.
.
.
Setting
No timecode will be written to the recording file.
Off
Timecode will not be output from the TIMECODE IN/OUT jack.
Internal timecode will be generated regardless of the recording
mode.
The internal timecode can be set manually using the following
menu items.
Int Free Run
• MENU > TIMECODE > Jam
• MENU > TIMECODE > Restart
Timecode will always be output from the TIMECODE IN/OUT
jack.
Internal timecode will be generated only when recording.
The internal timecode can be set manually using the following
menu items.
Int Rec Run • MENU > TIMECODE > Jam
•MENU > TIMECODE > Restart
When switching from another mode, the internal timecode will
stop at the last value.
Internal timecode will be generated regardless of the recording
mode.
In the following situations, the internal timecode will be syn-
chronized (jammed) with the RTC (internal clock).
Int RTC Run • At startup
• When Date/Time (RTC) changed ( → P. 18)
• When switching to this timecode mode
Timecode will always be output from the TIMECODE IN/OUT
jack.
The internal timecode will chase the external timecode.
Ext When there is no external timecode, automatic generation of
internal timecode can also be enabled. ( → P. 127)
The internal timecode will chase the external timecode.
When there is no external timecode, automatic generation of
internal timecode can also be enabled. ( → P. 127)
Ext Auto Rec
Recording starts automatically when external timecode input
is detected. Recording stops automatically when external time-
code stops.
125
Explanation