Zoom F6 Operation Manual page 86

On (Normal)
Before limiter use
On (Advanced)
Before limiter use
Setting
Off This disables the limiter.
On (Normal) This applies an ordinary limiter. The ratio is 20:1.
By detecting the maximum level in advance, this optimized lim-
On
iter prevents distortion even more than ordinary limiter opera-
(Advanced)
tion. The ratio is ∞:1, providing increased internal headroom.
Sometimes peaks remain
Threshold
After limiter use
Sudden peaks are
prevented by looking
ahead for maximum levels
Target level
After limiter use
Explanation
NOTE
When set to On (Advanced), the input latency of the
When monitoring sounds being recorded with a mic in real-time, increased
latency can cause interference between the sound being recorded that
is transmitted through the air and the delayed monitored sound, possibly
making accurate monitoring difficult.
NOTE
• • When set to On (Advanced), the Sample Rate cannot be set to 192 kHz.
• • Moreover, when the Sample Rate is set to 192 kHz, the On (Advanced)
setting cannot be selected.
86
increases 1 ms.