Monitoring The Input Signals Of Specified Tracks - Zoom F6 Operation Manual

Monitoring the input signals of specified tracks

The input signals of specified tracks can be monitored.
Even tracks that have not been set to record can be input to the PFL screen and their input sounds monitored.
This is convenient when using tracks as return inputs.
Carious settings can be made for selected tracks.
1.
Press when the Home Screen is open.
The PFL screen for the track that was last opened opens, and the
status indicator lights orange.
Only the input sound of the track show can be monitored through
headphones.
Level meter
(pre-fader input
signal level)
Parameter
Source This sets the input source.
Trim This sets the input level.
HPF/Limiter This sets the high pass filter and limiter.
Phase/Delay This sets the phase reversal and delay.
Pan This sets the panning.
Monitor This sets the monitoring volume on the PFL screen.
Parameter name
Explanation
NOTE
This does not change the signals output from line outputs.
HINT
• • Use
and to select parameters and change setting values.
• • When the cursor is on the topmost track number, press
next track.
2.
Press .
This opens the Home Screen.
77
to show the