Preparations; Supplying Power - Zoom F6 Operation Manual

Preparations

Supplying power

Power can be supplied three ways using AA batteries, an L battery or USB.
■ Using AA batteries
1.
Loosen the screw in the battery cover on the bottom.
2.
Open the battery compartment cover on the bottom,
remove the battery case, and insert 4 AA batteries.
3.
Put the case into the compartment.
4.
Close the battery cover and tighten the screw.
■ Using an L battery
1.
Slide the battery in the direction of the arrow while
pressing it toward the recorder.
NOTE
• • Be careful because the battery case could become loose unexpectedly if
the battery compartment cover screw is not tightened firmly.
• • Use only one type of batteries (alkaline, NiMH or lithium) at a time.
• • After loading AA batteries, set "Power Source" to the correct type of bat-
tery. ( → P. 20)
• • If the remaining battery power indicator becomes red, turn the power off
immediately and install new batteries.
13