Zoom F6 Operation Manual page 107

▶
Continue to one of the following procedures.
Setting the routing ........................................................................ P. 107
Using mono headphone output ................................................ P. 107
Monitoring mid-side stereo signals.......................................... P. 108
■ Setting the routing
6.
Use and to select the tracks/outputs for head-
phone routing and press
Mid-side stereo
monitoring
Set all tracks 1–6 to
pre-fader (cancel MS)
Press to cycle through
settings
• Change tracks 1–6 to
post-fader (cancel others)
• Change L/R to post-fader
(cancel others)
• Change Line to post-fader
(cancel others)
• Change U1–U4 to post-fader
(cancel others)
HINT
Press ENTER to cycle through the options: prefader → postfader → off.
.
Tracks routed to left
headphone channel
Tracks routed to right
headphone channel
Mono mix
Set to post-fader
Clear all settings
Set to pre-fader
Off
NOTE
• • L/R and line outputs cannot be set to prefader.
• • When AIF with Rec is set to On, USB track 1–4 can be assigned.
• • The 1–6, L/R, line outputs and USB track 1–4 cannot be selected at the
same time. Selecting one type will deselect any other.
7.
Press .
■ Using mono headphone output
6.
Use and
Mono , and press
7.
Press .
107
to select
.