Setting The Automatic Timecode Recording Delay - Zoom F6 Operation Manual

Setting the automatic timecode recording delay

If set to record automatically when external timecode is received, unnecessary recording could occur if timecode is received for a brief amount time.
In order to prevent this, the amount of time until recording starts after timecode is received can be set.
1.
Press .
2.
Use and to select
TIMECODE, and press
3.
Use and to select Auto
Rec Delay, and press
.
.
4.
Use and
the time, and press
HINT
This can be set from 0.0 to 8.0 s.
133
to adjust
.