Each file will automatically record the date/time.
To facilitate searching for files by date, be sure to set the date/time after every battery change.
Press.
Select <SYSTEM> and press.
Select <DATE/TIME> and press.
Select <OK> and press.
Select the item on <DATE/TIME>:
You can select the
item while moving
[ ] of the [DIAL].
Press the [DIAL] in
* The selected item values are highlighted.
[Change the figure number]:
You can select the
number by rotating
the [DIAL].
Press the [DIAL] in
* [ ] comes out on display.
NOTE:
during boot-up, the date/time needs
to be set.
connected for more than three
will return to the default value.
recording and playback.