Set Date And Time <Date/Time - Zoom H4next Operation Manual

5-2 Set date and time <DATE/TIME>
Each file will automatically record the date/time.
To facilitate searching for files by date, be sure to set the date/time after every battery change.
1
Press.
2
Select <SYSTEM> and press.
3
Select <DATE/TIME> and press.
5
Select <OK> and press.
4
Set YEAR➝MONTH➝DAY➝TIME
(Time: Minute: Second)
Select the item on <DATE/TIME>:
Press the [DIAL]
* The selected item figures are reversed.
[Change the figure number]:
Press the [DIAL]
* [ ] comes out on display.
You can select the
item while moving
[ ] of the [DIAL].
NOTE:
When "Reset DATE/TIME" is seen
on the display at the booting-up,
the date/time needs to be set.
You can select the
number by rotating
• When power off for more than
the [DIAL].
three minutes, the setting of the
date/time will be return to the
beginning one.
• You cannot use this setting during
recording and playback.
028