6.5.3
Removing and installing drives in the front drive cage
Requirement
1. The device is opened.
2. The drive fan has been removed and its adapter plug pulled.
Procedure - removing the drive cage
1.
2.
3.
4.
5.
6.
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
Remove all drive trays from the
removable drive bay.
Remove the retaining screws
②
and
.
Remove the cable ties
Then disconnect the power cable
④
and the data cable
installed removable drive bays.
⑤
Lift the drive cage
slightly at
the points indicated by the arrows
and slide it approximately 1 cm
toward the power supply.
Carefully lift the drive cage
the top out of the device and put it
down.
Expanding and assigning parameters to the device
①
③
.
from the
⑤
to
6.5 Drives
79