Advanced Settings; Resetting With Unconfigure - Siemens SIMATIC IPC847D Operating Instructions Manual

8.7.4

Advanced settings

The BIOS and the MEBx contain the most important basic settings for AMT. Additional tools
are necessary if you want to make more advanced settings. If required, these must be
downloaded from the relevant manufacturer's site. For information on the options and use of
these tools, refer to the relevant documentation of the manufacturer.
● Manageability Commander and other tools of the Intel DTK (Manageability Developer
● AMT Web interface: For encrypted connections, the URL of the Web interface is "https://
● WinRM: A command line program that is part of Windows as of Windows Vista. This tool
8.7.5

Resetting with Unconfigure

Note
If the AMT PC still has its factory settings, for example has just been purchased, you can
skip this section.
If you have already configured AMT previously, it is best to discard all the previous AMT
settings made in the MEBx.
Note
All previous settings in the management engine are deleted.
Correct operation in the plant may be at risk.
Note down all the settings in the MEBx. Make the settings again as necessary following
Unconfigure.
1. Enable the "Unconfigure ME" entry in "Advanced > Active Management Technology
2. Exit the BIOS with the <F10> key "Save and Exit". The AMT PC restarts.
3. After the restart, a user prompt appears asking whether you really want to discard all the
4. Confirm with "Y". On a German keyboard, this means pressing the <Z> key.
The device continues to boot with the factory settings of the management engine.
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
Tool Kit): Programs from the Intel DTK that you can download from the Internet at
"http://software.intel.com/en-us/manageability".
<Fully qualified domain name>:16993" and for unencrypted connections "http://<IP
address>:16992".
can be downloaded for older Windows versions.
Support" in the BIOS.
settings in the management engine:
Technical specifications
8.7 Active Management Technology (AMT)
191