Siemens SIMATIC IPC847D Operating Instructions Manual page 20

Overview
1.2 Design of the device
Layout of the interfaces on the rear of the device
Item Name
①
PROFIBUS/MPI
PROFINET
②
USB
③
ETHERNET 1, 2
1
④
COM
⑤
LPT
⑥
DP
⑦
KEYBOARD
⑧
MOUSE
⑨
DVI-I
⑩
Audio (input)
⑪
Audio (output)
⑫
Connecting
potentials
⑬
Expansion slots
For unique labeling, the LAN interfaces are numbered on the enclosure. The numbering by the operating system may
1
deviate from this.
Dual-head adapter for connection of two monitors to the optional graphics card
⑭
DMS59 connector
⑮
DVI-I connector
⑯
VGA connector
Not shown in figure
2
20
Description
PROFIBUS interface, compatible to CP5622 (RS 485, electrically isolated), 9-pin D-sub
socket (optional product characteristic)
CP-1616 onboard interface, three RJ45 sockets (optional product version)
Sockets on left: Connection for USB 2.0 devices
Sockets on right: Connection for USB 3.0/USB 2.0 devices
USB 2.0 and USB 3.0 connections use different USB ports.
2 x RJ45 connectors, Ethernet 10/100/1000 Mbps (ETHERNET 1 is AMT-capable)
Serial interface (V.24), 9-pin sub D plug, COM2 (optional)
Parallel interface, 25-pin (optional)
Two DisplayPort interfaces for CRT or LCD monitor with DP interface, CRT or LCD monitor
with VGA interface via DP->VGA adapter (optional)
Connection for a PS/2 keyboard
Connection for a PS/2 mouse
DVI/VGA port for CRT or LCD monitor with DVI interface, VGA via DVI/VGA adapter
Connection for analog audio source, microphone, 3.5 mm phono jack
Connection for active speakers or headset, 3.5 mm phono jack
Connection for equipotential bonding
Slots for expansion cards (behind slot cover)
DMS59 connection
DVI-I connections
VGA connections
2
Operating Instructions, 01/2014, A5E32997454-AA
SIMATIC IPC847D