Table of Contents
Advertisement
12.2.5
Installing/removing the DVD drive
Only qualified technical personnel are permitted to replace the DVD drive.
Tools
You need a TORX T10 and a T6 screwdriver to carry out the mounting work.
Preparatory steps
1. Disconnect the device from the power supply.
2. Unplug all peripherals (mouse, keyboard, external monitor, for example) from the device.
Removing a DVD drive
NOTICE
Note the ESB instructions.
Steps for replacing the DVD drive
1.
2.
3.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
CAUTION
Remove the two screws.
Slide the cover up.
Lift the cover and remove it.
12.2 Removing and installing hardware components
Maintenance and Service
107
Advertisement
Table of Contents
