Installing And Removing Disk Drives In The Front Drive Bay - Siemens SIMATIC PC 847B Operating Instructions Manual

Expansions and programming
10.4 Installing drives
10.4.2

Installing and removing disk drives in the front drive bay

Preparations
1. Unplug the device from mains and disconnect all cables.
2. Open the device
Remove the front drive bay
How to remove the front drive bay
1
2
3
4
70
Remove the mounting screws (2)
and (3).
Disconnect the power and data
cables from the installed disk
drives.
Lift up drive bay (1) by approx.
1 cm in the direction of the power
supply in order to access the
connecting cables of the floppy
disk drive.
Disconnect these cables
Remove the drive bay from the
device
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01