Removing a memory module
1. Always remove the memory
2. Open the two latches at the sides
3. Close the device.
Display of the current memory configuration
The new memory configuration is detected automatically. The allocation of the "base
memory and extended memory" is automatically displayed when you switch on the device.
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
modules in the reverse order:
1. DIMM 1-2
2. DIMM 1-1
3. DIMM 2-2
4. DIMM 2-1
of the memory module evenly.
Remove the memory module from
the slot.
Expanding and assigning parameters to the device
6.3 Expanding memory
73