Siemens SIMATIC IPC847D Operating Instructions Manual page 179

Advanced > SATA Configuration
System parameters
SATA Controller
HDC Configure As
Advanced > Fan Control Configuration
System parameters
Fan Control Mode
"Memory Power and Thermal
Throttling" submenu: Advanced
Temperature
Advanced > Video Configuration
System parameters
Primary Display
IGD - Aperture Size
IGD - DVMT Size
IGD boot type
PEG0 - Gen X
PEG1 - Gen X
PEG2 - Gen X
Advanced > USB Configuration
System parameters
USB Precondition
XHCI
Per-Port Control
The following parameters are only visible if "Per-Port Control" is enabled (Enabled).
USB Port 0 (X61)
USB Port 1 (X60)
USB Port 2 (USB3 P2, internal)
USB Port 3 (USB3 P3, front)
USB Port 4 (X63)
USB Port 5 (X62)
USB Port 6 (USB2 P6 front )
USB Port 8 (USB2 P8, internal)
USB Port 9 (USB2 P9, internal)
USB Port 10 (USB2 P10, internal)
USB Port 11 (USB2 P11, internal)
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
Default settings
Enabled
AHCI
Default settings
Enhanced
Default settings
Auto
128 MB
MAX
VBIOS default
Auto
Auto
Auto
Default settings
Enabled
Auto
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Technical specifications
8.6 BIOS description
Local settings
Local settings
Local settings
Local settings
179