Siemens SIMATIC IPC847D Operating Instructions Manual page 72

Expanding and assigning parameters to the device
6.3 Expanding memory
Procedure - installing a memory module
1. Install the memory modules in the
2. Remove the memory module from
3. Insert the memory module in the
4. Press both sides of the memory
5. Close the device.
72
following order:
1. DIMM 2-1
2. DIMM 1-1
3. DIMM 2-2
4. DIMM 1-2
its packaging.
Hold it by the upper edges only.
Note the indicated notch during
insertion.
slot perpendicular to the
motherboard.
module evenly to avoid jamming.
The memory module latches in
audibly.
The memory module is inserted
correctly if less than 1 mm of the
gold contacts is visible evenly
across the entire length of the
module.
Operating Instructions, 01/2014, A5E32997454-AA
SIMATIC IPC847D