Sony PDW-R1 Operation Manual page 92

Item number Item name
016 ALARM DISPLAY
017 SUB STATUS DISPLAY SELECT Determine the kind of sub status information to be displayed on the
024 MENU CHARACTER TYPE
029 STORED OWNERSHIP
031 RECORDING FORMAT
032 LCD MONITOR MODE
034 MENU STATUS DISPLAY ON
VIDEO MONITOR
92
7-2 Basic Setup Menu
Settings
Select whether or not to display alarm messages.
off: Do not display alarm messages. (However, certain important alarms are
displayed).
limit (on (limited)): Display only a minimum number of alarm messages.
on: Display all alarm messages.
For details about alarm message display conditions, see 8-4-1 "Alarm List"
(page 122).
a)
monitor.
off: Do not output sub status information.
rmain (disc remain): Available disc space (unit: minute)
clip (clip no): Order of playback of the selected clip/total number of clips
posi (playback position): Playback position within clip
pbr (playback remain): The remaining playback time of the selected clip
from the current playback position (hours:minutes:seconds:frames).
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Note
When menu item 005 is set to "off," sub status information is not displayed
when this item is set to anything other than "off."
Determine the type of characters in menu text displayed on the monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required type while viewing the monitor.
Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off: Do not enable.
on: Enable.
See 7-3-3 "Using UMID Data" (page 109) for more information about UMID.
Select the recording format.
IMX50 (IMX 50Mbps): MPEG IMX 50 Mbps
IMX40 (IMX 40Mbps): MPEG IMX 40 Mbps
IMX30 (IMX 30Mbps): MPEG IMX 30 Mbps
DVCAM: DVCAM
Set the aspect ratio for the video panel.
auto: the aspect ratio of the display screen automatically adjusts to the
aspect ratio of the input material.
16:9: set the aspect ratio to 16:9.
4:3: set the aspect ratio to 4:3.
Specify whether to display the setup menu status at the left edge of the
status display line when basic menu item 005 "DISPLAY INFORMATION
SELECT" is set to "T&sta."
dis (disable): Do not display.
ena (enable): Display. (The display is visible only when no disc is loaded,
and during insertion and ejection of a disc.)
a)