Connecting To A Nonlinear Editing; System; Connections For Recording In Parallel With A Camcorder - Sony PDW-R1 Operation Manual

1: i.LINK cable (not supplied)
PDW-R1
REMOTE REF VIDEO IN
DC OUT 12V IN
VIDEO
S400
IN OUT1 OUT2(SUPER) IN
S400 (i.LINK)
1
To i.LINK (IEEE1394)
connector
Laptop computer
Make sure extended menu item 215 "i.LINK MODE" is set to
"FAM (PC REMOTE)."
3-1-3 Connecting to a Nonlinear
Editing System
You can send video/audio signals (AV/C data) from this
unit to a nonlinear editing system connected to the S400
(i.LINK) connector.
The following figure shows an example connection.
Notes
• The S400 (i.LINK) connector of this unit outputs
video/audio signals in DVCAM format. Data recorded in
MPEG IMX format is output after being converted into
DVCAM format.
• The nonlinear editing system to be used being connected
to this unit requires editing software (not supplied)
supporting DVCAM format.
AUDIO IN
1/3 2/4
DIGITAL AUDIO (AES/EBU)
1/2 3/4 OUT 1/2 3/4
AUDIO OUT
SDI TC
1/3 2/4
OUT(SUPER) IN OUT
• Make the following settings before transferring video/
audio signals (AV/C data) from this unit to a nonlinear
editing system.
Audio mode selection
Use extended menu item 831 "DV OUT AUDIO
MODE" to select either of the following.
4ch: 12 bit/32 kHz/4ch
2ch: 16 bit/48 kHz/2ch (Factory default setting)
Audio output channel selection
Select the audio output channels with extended menu
item 828 "SDI/DV AUDIO OUTPUT SELECT."
For information about how to make extended menu item
settings, see 7-3-2 "Extended Menu Operations" on
page 108.
1: i.LINK cable (not supplied)
PDW-R1
REMOTE REF VIDEO IN
DC OUT 12V IN
VIDEO
S400
IN OUT1 OUT2(SUPER) IN
S400 (i.LINK)
1
To i.LINK(IEEE1394)
connector
Laptop computer
(With editing software supporting
DVCAM format installed)
Make sure extended menu item 215 "i.LINK MODE" is set to
"AV/C."
For the method of transferring video/audio signals (AV/C
data) to a nonlinear editing system, refer to the manual
provided with the editing software to be used.
3-1-4 Connections for Recording in
Parallel With a Camcorder
You can start and stop recording on this unit at the same
time that recording starts and stops on a camcorder. This
allows you to make a backup recording of the video and
audio shot by the camcorder. The following figure shows
an example of the connections to make.
AUDIO IN
1/3 2/4
DIGITAL AUDIO (AES/EBU)
1/2 3/4 OUT 1/2 3/4
AUDIO OUT
SDI TC
1/3 2/4
OUT(SUPER) IN OUT
3-1 Connections and Settings
27