Sony PDW-R1 Operation Manual page 91

Item number Item name
006 LOCAL FUNCTION ENABLE
007 TAPE TIMER DISPLAY
009 CHARACTER TYPE
011 CHARACTER V-SIZE
012 CONDITION DISPLAY ON
VIDEO MONITOR
013 525/625 SYSTEM SELECT
015 LCD CHARACTER TYPE
Settings
Determine which recording and playback control buttons on the control
panel are enabled when this unit is controlled from external equipment.
dis (all disable): All buttons and switches are disabled.
st&ej (stop & eject) : Only the STOP button and EJECT button are enabled.
ena (all enable): All buttons and switches are enabled.
Determine whether to display the counter in 12-hour mode or 24-hour mode.
+ –12H (+ /–12H) : 12-hour mode
24H: 24-hour mode
Determine the type of characters such as time code displayed on the
a)
monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required type while viewing the monitor.
Determine the vertical size of characters such as time code displayed on the
a)
monitor.
×1
:Standard size
×2 :2 times standard size
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required size while viewing the monitor.
Select whether to display disc condition marks on the monitor.
dis (disable): Do not display.
ena (enable): Display.
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Specify whether to enable switching between 525(U) line, 525(J) line and
625 line modes.
off: Do not enable system switching.
on: Enable system switching.
For the switching between 525(U)/525(J)/625 line modes, see page 95.
Note
When you switch line modes, all basic menu and extended menu items are
set to the factory defaults for the selected line mode.
Specify the type of characters used to display information on the monitor
when the STATUS button is pressed.
W/out: White letters with black outline.
white: White letters on a black background.
a) Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required type while viewing the monitor.
a)
a)
91
7-2 Basic Setup Menu