Sony PDW-R1 Operation Manual page 126

Message in time Display
data display
condition
MAX# SB CLP on, limit, off
CL OVER DUR on, limit, off
Run Salvage on, limit, off
CNT mode! on
TC EXT! on
REGEN mode! on
REC-PAUSE! on
REC mode! on, limit
REC mode! on, limit, off
REC mode! on, limit
REC mode! on, limit, off
No SEL List on, limit
No SUB Clip on, limit
SB CLP mode on, limit
SUB CLIP NG on, limit
No List! on, limit, off
126
8-4 Alarms
Description
a)
An attempt was made to add a sub clip
when the number of registered sub clips
had already reached the upper limit
(300) of the specifications of this unit.
An attempt was made to add a sub clip
when the total duration of sub clips in the
clip list had already reached the upper
limit (24 hours) of the specifications of
this unit.
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
on a disc which requires clip recovery
(salvage).
A time code or user bits preset operation
was attempted with "COUNTER"
selected by the COUNTER SEL button.
A time code or user bits preset operation
was attempted with the INT/EXT/RP188
switch is set to EXT and the PRESET/
REGEN switch is set to PRESET.
A time code or user bits preset operation
was attempted with the PRESET/
REGEN switch is set to REGEN.
A time code or user bits preset operation
was attempted with recording paused.
An attempt was made to switch video or
audio signals during recording.
An attempt was made to display the
system menu "DISC MENU" during
recording.
The THUMBNAIL button was pressed
during recording.
An attempt was made to display DRIVE
MAINTENANCE in the maintenance
menu during recording.
The SUBCLIP button was pressed
without loading a clip list from the disc
into the current clip list.
A button in the playback control section
was pressed when there were no sub
clips in the current clip list.
The SHIFT button and the THUMBNAIL
button were pressed together with the
SUBCLIP button lit.
The SHIFT and SET buttons were
pressed together when IN and OUT
points were not set correctly (the OUT
point was set before the IN point, etc.).
An attempt was made to delete a clip list
with no clip lists saved on the disc.
Action
These operations are not possible.
Try the operation again after executing the
salvage function.
For details, see 3-6-7 "Handling of Discs
When Recording Does Not End Normally
(Salvage Function)" (page 40).
Try the operation again after selecting "TC"
or "UB" with the COUNTER SEL button.
Try the operation again after setting the
INT/EXT/RP188 switch to INT and the
PRESET/REGEN switch to PRESET.
See 7-3-2 "Extended Menu Operations"
(page 108) about how to make this setting.
Try the operation again after stopping
recording.
Try the operation again after loading a clip
list.
For details, see 5-3-1 "Loading a Clip List
From Disc Into Unit Memory" (page 68).
Playback is not possible without a sub clip
in the current clip list.
Press the SUBCLIP button, turning it off,
and try the operation again.
Set the IN and OUT points correctly and try
the operation again.
This operation is not possible.