Sony PDW-R1 Operation Manual page 113

Item
SUBNET MASK PRESET
DEFAULT GATEWAY PRESET
LINK SPEED
DUPLEX
For details of how to make settings, see "To change
network settings" (page 115).
Item
EXTENDED MENU
SETUP BANK4
SAVE MENU DATA
LOAD MENU DATA
AU BANK RECALL
RESET ALL SETUP
NETWORK CONFIG: items relating to network settings
Setting
Set the subnet mask.
255.255.255.000
Note
When DHCP is set to "ENABLE," it is not possible to set the subnet mask.
Set the default gateway.
000.000.000.000
Note
When DHCP is set to "ENABLE," it is not possible to set the default gateway.
Set the communications speed.
AUTO, 10Mbps, 100Mbps
Set the communications method.
AUTO, Full (Full Duplex), Half (Half Duplex)
SETUP MAINTENANCE: items relating to the setup menu
Setting
Select whether or not to display the extended menu.
DISABLE: Do not display.
ENABLE: Display.
Select the bank to be stored in menu bank 4, or reset menu bank 4.
Cur to 4 (CURRENT TO BANK4): Store the current menu settings in menu bank 4.
1 to 4 (BANK1 TO BANK4): Store the menu bank 1 settings in menu bank 4.
2 to 4 (BANK2 TO BANK4): Store the menu bank 2 settings in menu bank 4.
3 to 4 (BANK3 TO BANK4): Store the menu bank 3 settings in menu bank 4.
Reset (RESET BANK4): Reset menu bank 4.
Select whether to temporarily back up (save) setup menu settings before operations such as
software upgrades.
SET button: Back up (save) the settings.
MENU button: Return to next highest menu level without backing up.
Select whether to restore (load) setting that were backed up (saved) with the "SAVE MENU
DATA" item.
SET button: Restore (load) the settings.
MENU button: Return to the next highest menu level without restoring.
Select whether to recall settings automatically from a menu bank when the system is
powered on, and if so which menu bank to recall from.
off: Do not recall settings from a menu bank.
Bank1 (from BANK1): Recall settings from menu bank 1.
Bank2 (from BANK2): Recall settings from menu bank 2.
Bank3 (from BANK3): Recall settings from menu bank 3.
Bank4 (from BANK4): Recall settings from menu bank 4.
Reset the current menu settings to the factory settings.
SET button: Reset.
MENU button: Return to the next highest menu level without resetting.
Notes
• The line mode setting is also cleared. If you execute this item, reset the line mode (see
page 7).
• Date and time settings are not cleared, but the time zone setting is cleared. After executing
this item, reset the time zone (see page 34).
113
7-4 Maintenance Menu