Sony PDW-R1 Operation Manual page 124

Message in time Display
data display
condition
4CHx24 Clip on, limit
8CHx16 Clip
No Support! on, limit, off
ILL. Index! on, limit, off
FORMAT NG! on, limit, off
DI read err on, limit, off
DRV ADJ err on, limit, off
a) With respect to setting of basic menu item 016
During playback
Message in time Display
data display
condition
525/60 Disc on, limit
625/50 Disc on, limit
Disc Error! on, limit, off
a) With respect to setting of basic menu item 016
During control panel operations
Message in time Display
data display
condition
KEY INHI.! on
REMOTE! on
124
8-4 Alarms
Description
a)
The number of channels and quantizing
bits of the loaded disc differ from the
specifications of maintenance menu item
"AUDIO CONFIG" - "DATA LENGTH."
A disc recorded in an unsupported
recording format was inserted.
An index file error was detected.
Automatic format failed.
A disc read error occurred.
Adjustment processing failed when a
disc was inserted.
Description
a)
An attempt was made to play back a disc
recorded with the NTSC system when
this unit is in 625 line mode (PAL
system).
An attempt was made to play back a disc
recorded with the PAL system when this
unit is in 525(U) or 525(J) line mode
(NTSC system).
Normal playback is not possible because
of a disc defect.
Description
a)
An operation button inhibited by
extended menu item 118 "KEY INHIBIT"
was pressed while the KEY INH
indicator was lit.
A button was pressed while the remote
control switch was set to "REMOTE."
Action
To record on the disc, change the setting of
maintenance menu item "AUDIO CONFIG"
- "DATA LENGTH."
See 7-4-2 "Maintenance Menu Operations"
(page 114) about how to change this
setting.
Use a disc recorded in the MPEG IMX or
DVCAM format.
Format the disc.
For details, see 3-6-5 "Formatting a Disc"
(page 39).
Use another disc.
Try ejecting the disc and inserting it again,
or insert another disc.
Action
Use a disc recorded with the PAL system.
Use a disc recorded with the NTSC
system.
Use another disc.
You can check the state of a disc by
checking playback condition marks (see
page 36).
Action
Set the corresponding sub-item of
extended menu item 118 to "off."
See 7-3-2 "Extended Menu Operations"
(page 108) about how to make this setting.
To operate from the front panel, wait until
control by the remote device ends and then
set the remote control switch to "LOCAL."