Sony PDW-R1 Operation Manual page 103

Menu items in the 600s, relating to the time code, metadata, and UMID
Item number Item name
652 UMID SDI VANC LINE
657 ESSENCE MARK SDI OUTPUT
660 ESSENCE MARK SDI VANC LINE
Item Item name
number
701 SELECTION OF VIDEO/SYNC
DELAY
Settings
Select the line in which UMID is output when menu item 651 is set to
"on."
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (625
line mode)
See 7-3-3 "Using UMID Data" (page 109) for more information about
UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
When item 657 is set to "on," select the line to which to output essence
marks.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (625
line mode)
Menu items in the 700s, relating to video control
Settings
An E-E video signal is output delayed with respect to the video input signal by
the time for video circuit processing.
With this item, select whether or not to delay the sync signal attached to the
output video signal by an amount corresponding to the video signal delay.
sync (sync delay): Delay the sync signal by the corresponding amount
before attaching it.
video (video delay): Attach a sync signal with the same timing as the input
signal.
103
7-3 Extended Menu