Suzuki SY413 Service Manual page 5161

3. Washer
3) Check both directions by reversing probes of ohmmeter (1) and
there should be only one-way continuity for diode component
(2).
If check result is not satisfactory, replace magnet clutch compo-
nent.
REMOVAL
1) Remove compressor. Refer to "A. COMPRESSOR" in this sec-
tion.
2) Fix clutch plate (1) with special tool (A) and remove clutch plate
bolt (2).
Special Tool
(A): 09991-06020
3) Remove clutch plate by using special tool (B).
Special Tool
(B): 09991-06030
4) Disconnect clutch coil read wire from thermal switch.
5) Remove diode component (1) from compressor body (2) by
loosening attaching bolt (3).
6) Remove shims from shaft.
7) Remove circlip using special tool (C).
Special Tool
(C): 09900-06107
AIR CONDITIONING (OPTIONAL) S-1B-7