6A4-14 ENGINE MECHANICAL
1. Main fuse box
2. Glow plug control module
3. Relay
4. Coupler
4) Remove 2 relays, grow-plug control module and main fuse
box.
5) Disconnect 2 couplers from main harness.
6) Remove fuel filter assembly from bracket with hoses still con-
nected. Lower engine assembly with harness.
7) Install lifting device.
8) Remove rear mounting.
9) Remove 2 bolts that fix mounting member and suspension
frame.
10) Remove bolt from engine front torque bush.
11) Remove 2 bolts that fix mounting member and front member.
Then remove mounting member.
12) Remove left mounting from body. (2 bolts)
13) Remove engine right mounting from engine right bracket. (2
bolts and 1 nut)
14) Remove engine right mounting from body. (1 bolt)
15) Before removing engine with transmission, ensure that all
hoses, electric wires and cables are disconnected from engine
and transmission.
16) Lower engine with transmission from body.