Suzuki SY413 Service Manual page 5158

S-1B-4 AIR CONDITIONING (OPTIONAL)
7) Loosen compressor mounting bolt (1), then remove compres-
sor with magnet clutch assembly (2) from its mounting bracket.
NOTE:
When removing compressor, be careful not to damage fins
of condenser.
8) Drain oil from compressor, and measure its amount.
INSTALLATION
Reverse removal procedure noting following point.
D Tightening order
Order : (a) " (b) " (c)
Tightening Torque
(a), (b), (c): 26 N·m (2.6 kg-m, 19 Ib-ft)
D Pour new compressor oil with the same amount as that drained
from compressor.
D Evacuate and charge system according to previously described
procedure.
CAUTION:
Be sure to use specified HFC-134a (R-134a) compres-
sor oil.
Compressor oil: 99000-99088-00D0
NOTE:
Compressor assembly supplied from factory is filled up
with following amount of oil.
Oil capacity: 120 cm
3
(120 cc, 7.3 cu. in.)