1. Generator
2. Generator bolt
3. 'B' terminal
4. 'L' terminal
REMOUNTING
Reverse removal procedure for installation noting the followings.
D Tighten generator bolts and its terminal as follows.
Tightening Torque
.
(a): 50 N
m (5.0 kg-m, 36.2 lb-ft)
.
(b): 10.0 N
m (1.0 kg-m, 7.2 lb-ft)
.
(c): 4.0 N
m (0.4 kg-m, 2.9 lb-ft)
D Adjust accessory drive belt tension, referring to "AC-
CESSORY DRIVE BELT INSTALLATION" in this section.
CHARGING SYSTEM 6H-9