Replacing interior light bulbs
Replacing rear interior lamps
Requirements:
%
For the standard bulb failure indicator func‐
tion to work correctly, only lights bulbs must
be used that are the same type and power as
those installed during production.
Switch off the interior lighting.
#
Press in catch spring of lens
#
ble object e.g. a screwdriver, and then lever
off the lens with the lamp housing.
To pull back lens from the lamp housing:
#
press the lugs of lens
Remove light bulb
3
#
Insert the new light bulb.
#
Insert the lens in the lamp housing until it
#
engages.
Place the lens with the lamp housing in posi‐
#
tion and engage it.
1
with a suita‐
2
inwards.
from the lamp housing.
Windshield wipers
Switching the front windshield wipers on and
off
1
î Single wipe/wiping with washer fluid
1 g Windshield wipers off
2 Ä Intermittent wiping, normal
Vehicles with rain sensors: automatic wiping,
normal
3 Å Intermittent wiping, frequent
Vehicles with rain sensors: automatic wiping,
frequent
4 ° Continuous wiping, slow
5 ¯ Continuous wiping, fast
Turn the combination switch to the corre‐
#
sponding position 1 – 5.
Single wipe/washing: press the button on
#
the combination switch in the direction of
arrow 1.
í Single wipe
R
î Wipes with washer fluid
R
89
Light and vision