Display In The Instrument Display (Color Display); Operating Cruise Control - Mercedes-Benz Sprinter 2019 Operating Instructions Manual

Hide thumbs Also See for Sprinter 2019:
Table of Contents

Advertisement

Display in the Instrument Display (color display)

1
Cruise control is selected
2
Set speed gray: speed is stored, cruise con‐
trol is deactivated
3
Set speed green: speed is stored, cruise con‐
trol is activated
System limitations
Cruise control may be unable to maintain the
stored speed on uphill gradients. The stored
speed is resumed when the gradient evens out.
On long and steep downhill gradients, you should
change down to a lower gear in good time. Take
particular note of this when driving a laden vehi‐
cle. By doing so, you will make use of the
engine's braking effect. This relieves the load on
the brake system and prevents the brakes from
overheating and wearing too quickly.
Do not use cruise control in the following situa‐
tions:
In traffic situations where frequent speed
R
changes are required, e.g. in heavy traffic or
on winding roads.
On slippery roads. Accelerating can cause the
R
drive wheels to lose traction and the vehicle
could then skid.
If you are driving when visibility is poor.
R

Operating cruise control

& WARNING Risk of accident due to stored
speed
If you call up the stored speed and this is
lower than your current speed, the vehicle
decelerates.
Take into account the traffic situation
#
before calling up the stored speed.
Requirements:
®
ESP
is activated, but may not intervene.
R
The driving speed is at least 15 mph
R
(20 km/h).
To activate cruise control: push rocker
#
switch
1
up.
Remove your foot from the accelerator pedal.
#
The current speed is then saved and main‐
tained by the vehicle.
Push rocker switch
#
To increase/reduce speed: push rocker
#
switch
2
up or down.
The stored speed is increased or reduced by
1 mph (1 km/h).
or
Press rocker switch
#
The stored speed is increased or reduced in
1 mph (1 km/h) increments.
or
Push rocker switch
#
point.
The stored speed is increased or reduced by
5 mph (10 km/h).
or
Push rocker switch
#
point and hold.
The stored speed is increased or reduced in
5 mph (10 km/h) increments.
or
Accelerate the vehicle to the desired speed.
#
Push rocker switch
#
If cruise control is activated and Traffic Sign
Assist has detected a speed restriction sign with
a maximum permissible speed and this appears
in the instrument display:
To adopt the detected speed: push rocker
#
switch
3
up.
The maximum permissible speed shown by
the traffic sign is stored and the vehicle main‐
tains this speed.
Driving and parking 143
1
up.
2
up or down and hold.
2
beyond the pressure
2
beyond the pressure
2
up.

Advertisement

Table of Contents
loading

Table of Contents