Table of Contents
Advertisement
86
Light and vision
Low beam/perimeter lights: pull back
#
housing cover 1.
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
#
the base of the bulb rests fully against the
base of the socket.
Align and insert the socket.
#
Attach housing cover 1.
#
High beam/daytime running lights: pull
#
back housing cover 2.
Turn the socket counter-clockwise and pull it
#
out.
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
#
the base of the bulb rests fully against the
base of the socket.
Insert the socket and turn it clockwise.
#
Attach housing cover 2.
#
Turn signal indicator:
#
Turn socket
3
counter-clockwise and
#
remove it.
Gently turn the bulb counter-clockwise and
#
take it out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Insert socket
3
and turn it clockwise.
#
Additional turn signal light
Requirements:
Additional turn signal light (all-wheel
R
drive vehicles): bulb type P 21 W
Switching off the lighting system.
#
Unscrew
screws1
#
Gently turn the bulb counter-clockwise and
#
take it out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Place
lens2
in position and tighten the
#
screws1.
Replacing rear light bulbs (Cargo Van and
Passenger Van)
Overview of rear bulb types (Cargo Van and
Passenger Van)
You can change the following bulbs.
Vehicles with standard tail lamps
1
Brake lights/tail lamps/perimeter lights:
P 21 W
2
Reversing lights: P 21 W
3
License plate lamp: W 5 W
4
Rear fog lights: P 21 W
You can change the following bulbs.
and remove lens 2.
Advertisement
Table of Contents
