Table of Contents
Advertisement
218 MBUX multimedia system
The display is split into two parts. The map is
displayed on the left; on the right, there is a
detailed image of the intersection or a 3D
image of the upcoming change of direction.
Change-of-direction phase
R
The multimedia system announces the immi‐
nent change of direction, e.g. by announcing
"Now turn right".
The display is split into two parts.
The change of direction takes place when the
distance to maneuver point
0 ft (0 m) and the symbol for vehicle position
3
has reached maneuver point 2.
When the change of direction is complete, the
map appears in full-screen mode.
%
Changes of direction are also shown in the
Instrument Display.
Lane recommendations overview
This display appears for multi-lane roads.
The multimedia system can show lane recom‐
mendations if the digital map contains the rele‐
vant data.
1
Lane not recommended (gray arrow)
2
Possible lane (white arrow)
3
Recommended lane (white arrow, blue back‐
ground)
Explanation of the displayed lanes:
Lane not recommended
R
In this lane, you will not be able to complete
the next change of direction without changing
lane.
Possible lane
2
R
In this lane, you will only be able to complete
the next change of direction.
Recommended lane
R
In this lane, you will be able to complete both
the next change of direction and the one after
that.
2
is shown with
1
3
During the change of direction, new lanes may be
added.
%
Lane recommendations can also be shown in
the Instrument Display.
Using freeway information
Requirements:
The
Highway Information
R
on (
page 225).
/
When driving on the freeway, upcoming freeway
facilities
1
and available service facilities
shown in the overview. These include gas sta‐
tions, parking lots, service stations and freeway
exits, for example.
To open the display: select r.
#
The entries are sorted according to increasing
distance from the current vehicle position.
To close the display: tap on the map.
#
or
To use freeway information: select an
#
entry.
If several service facilities are available,
#
select a service facility from the list.
The destination address and the map position
are shown.
Calculate the route (
#
or
Search for a POI in the vicinity.
#
or
Use other functions, e.g. save the destination
#
address of the service facility.
Using quick-access for a destination, alterna‐
tive route and POIs
Requirements:
The POI categories are configured for quick-
R
access (
page 209).
/
option is switched
2
page 211).
/
are
Advertisement
Table of Contents
