Attention Assist; Activating/Deactivating Automatic Operation Of Rear View Camera; Activating/Deactivating Maneuvering Assistance; Function Of Attention Assist - Mercedes-Benz Sprinter 2019 Operating Instructions Manual

152 Driving and parking
The image from the 360° Camera appears auto‐
matically in the multimedia system when the fol‐
lowing conditions are fulfilled:
The ignition is switched on.
R
The rear-end doors are opened.
R
This means that the area behind the vehicle can
be monitored.
When the rear-end doors are closed, the image
from the rear view camera is switched off after
approximately ten seconds.
See the notes on cleaning the 360° Camera
( page 274).
/
Selecting a view for the 360° Camera
Requirements:
The Auto. Rear View Cam.
R
multimedia system (
Engage reverse gear.
#
Select the desired view in the multimedia sys‐
#
tem.
Activating/deactivating automatic operation
of the rear view camera
The rear view camera is only an aid. It is not a
substitute for you paying attention to the sur‐
roundings. You are always responsible for safe
maneuvering, parking in and exiting from a park‐
ing space. Make sure that no persons, animals or
objects etc. are in the path of your vehicle. Pay
attention to your surroundings and be ready to
brake at all times.
Multimedia system:
© Settings
4 5
Camera & Parking
5
Activate or deactivate
#
Activating/deactivating maneuvering assis‐
tance
Multimedia system:
© Settings
4 5
Camera & Parking
5
Activate or deactivate
#
%
When maneuvering assistance is activated,
the following functions are active:
Drive Away Assist (
R
Rear Cross Traffic Alert (
R
is activated in the
page 152).
/
Assistance
5
Auto. Rear View Cam..
Assistance
5
Maneuvering Assist..
page 156)
/
page 156)
/

ATTENTION ASSIST

Function of ATTENTION ASSIST

ATTENTION ASSIST can assist you on long,
monotonous journeys, e.g. on freeways and
expressways. If ATTENTION ASSIST detects indi‐
cators of fatigue or increased lapses in concen‐
tration on the part of the driver, it suggests taking
a break.
ATTENTION ASSIST is only an aid. It cannot
always detect drowsiness or increased lapses in
concentration in good time. The system is not a
substitute for a well-rested and attentive driver.
On long journeys, take regular and timely breaks
that allow you to rest properly.
You can choose between two settings:
Standard: normal system sensitivity
R
Sensitive: higher system sensitivity. The
R
driver is warned earlier and the attention level
detected by the system (Attention Level) is
adapted accordingly.
If fatigue or increased lapses in concentration are
detected, the ATTENTION ASSIST: Take a Break!
warning appears in the Instrument Display. You
can acknowledge the message and take a break if
necessary. If you do not take a break and ATTEN‐
TION ASSIST continues to detect increased lap‐
ses in concentration, you will be warned again
after a minimum of 15 minutes.
Instrument Display (color display)
You can have the following status information for
ATTENTION ASSIST displayed in the Assistance
menu of the on-board computer:
The journey length since the last break
R
The attention level determined by ATTENTION
R
ASSIST:
The fuller the circle is, the higher the
-
detected attention level is
The circle in the center of the display
-
empties from the outside inwards as
attentiveness decreases