Table of Contents
Advertisement
90
Light and vision
Switching the rear window wiper on/off
1
ô Single wipe/wash
2
è Intermittent wiping
Single wipe: press button
#
resistance.
Wiping with washer fluid: press button
#
beyond the point of resistance.
To switch intermittent wiping on or off:
#
press button 2.
If the rear window wiper is switched on, the
è symbol will appear on the Instrument
Display.
Replacing the windshield wiper blades
& WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windshield wipers
#
and the ignition before changing the
wiper blades.
& WARNING Risk of injury from using the
windshield wipers while the engine hood
is open
When the engine hood is open and the wind‐
shield wipers are set in motion, you can be
trapped by the wiper linkage.
Always switch off the windshield wipers
#
and ignition before opening the engine
hood.
1
to the point of
1
%
If the wiper blades are worn out, they will not
wipe the windshield properly. Replace the
wiper blades twice a year, preferably in
spring and fall.
Fold wiper arm
3
#
Hold wiper arm
3
#
away from wiper arm
the arrow as far as it will go.
Slide catch
2
upwards in the direction of the
#
arrow until it engages.
Fold back the wiper blade onto the wiper arm.
#
Remove wiper blade
#
Insert new washer blade
#
wiper arm 3.
When doing so, take into account the different
lengths of the wiper blades:
Driver's side: long wiper blade
R
Front-passenger side: short wiper blade
R
Slide catch
2
downwards until it engages.
#
Fold wiper arm
3
#
Replacing the windshield wiper blades (WET
WIPER SYSTEM)
& WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windshield wipers
#
and the ignition before changing the
wiper blades.
away from the windshield.
and turn the wiper blade
3
in the direction of
1
from wiper arm.
1
in the holder on
back onto the windshield.
Advertisement
Table of Contents
