Hoshizaki IM-240DME Service Manual page 99

17. FAN MOTOR - DME/XME/AME ONLY 17. FAN MOTOR - DME/XME/AME ONLY
1) Unplug the icemaker or disconnect the power source. 1) Unplug the icemaker or disconnect the power source.
2) Remove the Top, Front and Right Side Panels. 2) Remove the Top, Front and Right Side Panels.
3) Disconnect the Connector of the Fan Motor. 3) Disconnect the Connector of the Fan Motor.
4) Remove the Fan Motor Bracket and the Fan Motor. 4) Remove the Fan Motor Bracket and the Fan Motor.
5) Cut the leads of the Fan Motor allowing enough lead length to reconnect using closed end 5) Cut the leads of the Fan Motor allowing enough lead length to reconnect using closed end
connectors. connectors.
6) Install the new Fan Motor in the reverse order of the removal procedure. 6) Install the new Fan Motor in the reverse order of the removal procedure.
7) Refit the panels in their correct positions. 7) Refit the panels in their correct positions.
8) Plug in the icemaker or connect the power source. 8) Plug in the icemaker or connect the power source.
18. FAN MOTOR - DSME/XSME ONLY 18. FAN MOTOR - DSME/XSME ONLY
1) Unplug the icemaker or disconnect the power source. 1) Unplug the icemaker or disconnect the power source.
2) Remove the Condenser Cover and Junction Box Cover. 2) Remove the Condenser Cover and Junction Box Cover.
3) Cut the Fan Motor Leads at the connectors in the Junction Box. 3) Cut the Fan Motor Leads at the connectors in the Junction Box.
4) Release the Fan Motor Bracket and the Fan Motor, pulling the cut leads from the Junction 4) Release the Fan Motor Bracket and the Fan Motor, pulling the cut leads from the Junction
Box. Box.
5) Install the new Fan Motor in the reverse order of the removal procedure. 5) Install the new Fan Motor in the reverse order of the removal procedure.
6) Reconnect the Fan Motor Leads to the Fan Wiring Cord using new closed end connectors. 6) Reconnect the Fan Motor Leads to the Fan Wiring Cord using new closed end connectors.
7) Refit the panels in their correct positions. 7) Refit the panels in their correct positions.
8) Plug in the icemaker or connect the power source. 8) Plug in the icemaker or connect the power source.
9) Check the operation of the Fan. 9) Check the operation of the Fan.
E1CG4880210 E1CG4880210
95 95