Hoshizaki IM-240DME Service Manual page 31

[b] IM-240A [b] IM-240A
1) Fully screw in the four legs provided (bin 1) Fully screw in the four legs provided (bin
accessory) into the Storage Bin underside. accessory) into the Storage Bin underside.
See Fig. 6. See Fig. 6.
2) Position the Storage Bin in the selected 2) Position the Storage Bin in the selected
permanent site. permanent site.
3) Place the icemaker on top of the Storage Bin 3) Place the icemaker on top of the Storage Bin
by holding the bottom. by holding the bottom.
4) Secure the icemaker to the Storage Bin, by 4) Secure the icemaker to the Storage Bin, by
using the two mounting brackets and two bolts using the two mounting brackets and two bolts
provided. See Fig. 7. provided. See Fig. 7.
5) Seal the seam between the icemaker and the 5) Seal the seam between the icemaker and the
Storage Bin with food grade sealant. Storage Bin with food grade sealant.
6) Remove the Drain Pipe Collar and Drain Pan. 6) Remove the Drain Pipe Collar and Drain Pan.
Secure the Bin Control Switch to the Mounting Secure the Bin Control Switch to the Mounting
Frame using the two bolts and flat washers Frame using the two bolts and flat washers
provided. Fix the Bin Control Switch wiring provided. Fix the Bin Control Switch wiring
with the two nylon ties. Place the Ice Chute with the two nylon ties. Place the Ice Chute
on the Unit Frame, and refit the Drain Pan in on the Unit Frame, and refit the Drain Pan in
its correct position. See Fig. 8. its correct position. See Fig. 8.
7) Refit the panels in their correct positions. 7) Refit the panels in their correct positions.
8) Adjust the four legs on the bottom (adjustable 8) Adjust the four legs on the bottom (adjustable
from 0 to 25.4 mm) to have the icemaker from 0 to 25.4 mm) to have the icemaker
perfectly horizontal. Use the spirit level. See perfectly horizontal. Use the spirit level. See
Fig. 9. Fig. 9.
E1CG4880210 E1CG4880210
Bolt Bolt
Mounting Mounting
Bracket Bracket
Drain Pipe Collar Drain Pipe Collar
Packing Packing
Drain Pan Drain Pan
Adjust legs Adjust legs
27 27
Bottom Plate Bottom Plate
Adjustable Legs Adjustable Legs
Fig. 6 Fig. 6
Icemaker Icemaker
Bin Bin
Fig. 7 Fig. 7
Unit Frame Unit Frame
Ice Chute Ice Chute
Washer Washer
Bolt Bolt
Bin Control Switch Bin Control Switch
Fig. 8 Fig. 8
Fig. 9 Fig. 9
Mounting Frame Mounting Frame
Tie Tie