Hoshizaki IM-240DME Service Manual page 57

Stackable cuber
Hide thumbs Also See for IM-240DME:
Table of Contents

Advertisement

16) As soon as the Water Pan closes, pour the sanitizing solution prepared in 14) carefully
16) As soon as the Water Pan closes, pour the sanitizing solution prepared in 14) carefully
into the Water Pan. Do not splash or spill the solution onto the other parts.
into the Water Pan. Do not splash or spill the solution onto the other parts.
17) Circulate the solution for 15 minutes. Open the water supply tap, and repeat the above
17) Circulate the solution for 15 minutes. Open the water supply tap, and repeat the above
steps 6) and 7).
steps 6) and 7).
18) When the Water Pan closes again, pour clean water into the Water Pan until it floods from
18) When the Water Pan closes again, pour clean water into the Water Pan until it floods from
the Overflow Pipe, and circulate the water for 5 minutes.
the Overflow Pipe, and circulate the water for 5 minutes.
19) Repeat the above steps 6), 7) and 18) at least three times to rinse thoroughly.
19) Repeat the above steps 6), 7) and 18) at least three times to rinse thoroughly.
20) Move the Tank Drain Pipe to the normal position, and secure it with the screw. See Fig.
20) Move the Tank Drain Pipe to the normal position, and secure it with the screw. See Fig.
36.
36.
21) Repeat the above steps 6) and 7) again. When the
21) Repeat the above steps 6) and 7) again. When the
icemaker stops, move the Washing Switch to the "ICE"
icemaker stops, move the Washing Switch to the "ICE"
position. See Fig. 46. (The icemaker will resume
position. See Fig. 46. (The icemaker will resume
icemaking process.)
icemaking process.)
22) Replace the Front Panel and Top Panel in their correct
22) Replace the Front Panel and Top Panel in their correct
positions.
positions.
23) Complete Storage Bin cleaning as detailed in V. 1. [3].
23) Complete Storage Bin cleaning as detailed in V. 1. [3].
Be sure to operate the Bin Control Switch as specified in 11) and 17) within 40
Be sure to operate the Bin Control Switch as specified in 11) and 17) within 40
minutes after the Water Pan closes. After 40 minutes pass, the interlock will
minutes after the Water Pan closes. After 40 minutes pass, the interlock will
operate to stop the icemaker. (It will not reset automatically.) If the interlock
operate to stop the icemaker. (It will not reset automatically.) If the interlock
should operate, disconnect the power source and then reconnect it.
should operate, disconnect the power source and then reconnect it.
E1CG4880210
E1CG4880210
IMPORTANT
IMPORTANT
53
53
Fig. 46
Fig. 46

Advertisement

Table of Contents
loading

Table of Contents