Hoshizaki IM-240DME Service Manual page 53

2. WATER VALVE 2. WATER VALVE
1) Unplug the icemaker or disconnect the power source. 1) Unplug the icemaker or disconnect the power source.
2) Close the water supply tap. 2) Close the water supply tap.
3) Remove the Top Panel and Front Panel. 3) Remove the Top Panel and Front Panel.
4) Disconnect the Inlet Hose from the Water Valve. 4) Disconnect the Inlet Hose from the Water Valve.
5) Remove the Mesh Filter from the Water Valve. 5) Remove the Mesh Filter from the Water Valve.
6) Clean the Mesh using a brush. 6) Clean the Mesh using a brush.
7) Replace the Mesh and Inlet Hose in their correct positions. 7) Replace the Mesh and Inlet Hose in their correct positions.
8) Open the Shut-off Valve. 8) Open the Shut-off Valve.
9) Plug in the icemaker or connect the power source. 9) Plug in the icemaker or connect the power source.
10) Check for leaks. 10) Check for leaks.
11) Replace the panels in their correct positions. 11) Replace the panels in their correct positions.
E1CG4880210 E1CG4880210
Coil Coil
Do not remove Do not remove
Filter Filter
Packing Packing
Fig. 41 Fig. 41
49 49
Inlet Hose Inlet Hose