Hoshizaki IM-240DME Service Manual page 89

10. WATER VALVE 10. WATER VALVE
1) Close the water supply tap. 1) Close the water supply tap.
2) Unplug the icemaker or disconnect the power source. 2) Unplug the icemaker or disconnect the power source.
3) Remove the Top Panel and Front Panel. 3) Remove the Top Panel and Front Panel.
4) Disconnect the Receptacle (leads) from the Water Valve. 4) Disconnect the Receptacle (leads) from the Water Valve.
5) Remove the Valve Outlet tubing by releasing the Clamp. 5) Remove the Valve Outlet tubing by releasing the Clamp.
6) Remove the Inlet Hose and Water Valve. 6) Remove the Inlet Hose and Water Valve.
7) Install the new valve in the reverse order of the removal procedure. 7) Install the new valve in the reverse order of the removal procedure.
8) Open the water supply tap. 8) Open the water supply tap.
9) Plug in the icemaker or connect the power source. 9) Plug in the icemaker or connect the power source.
10) Check for leaks. 10) Check for leaks.
11) Replace the panels in their correct positions. 11) Replace the panels in their correct positions.
Note: When replacing parts, disassemble as shown in Fig. 41 (page 49) and replace the Note: When replacing parts, disassemble as shown in Fig. 41 (page 49) and replace the
defective parts. defective parts.
E1CG4880210 E1CG4880210
85 85