Hoshizaki IM-240DME Service Manual page 88

9. PUMP MOTOR 9. PUMP MOTOR
1) Unplug the icemaker or disconnect the power source. 1) Unplug the icemaker or disconnect the power source.
2) Remove the Top Panel and Front Panel. 2) Remove the Top Panel and Front Panel.
3) Disconnect the Pump Motor leads in the Wiring Channel. 3) Disconnect the Pump Motor leads in the Wiring Channel.
4) Remove screws and the Pump Motor from the Bracket. 4) Remove screws and the Pump Motor from the Bracket.
5) Disconnect the Pump Suction and Discharge Tubings. 5) Disconnect the Pump Suction and Discharge Tubings.
6) Disassemble the Pump Motor and check the Motor or parts. 6) Disassemble the Pump Motor and check the Motor or parts.
7) Install the new motor or parts in the reverse order of the removal procedure. 7) Install the new motor or parts in the reverse order of the removal procedure.
8) Plug in the icemaker or connect the power source, and check for leaks. 8) Plug in the icemaker or connect the power source, and check for leaks.
9) Replace the panels in their correct positions. 9) Replace the panels in their correct positions.
INDEX NO. INDEX NO. DESCRIPTION DESCRIPTION
1 1 Pump Motor Pump Motor
2 2 Retainer Retainer
3 3 Mechanical Seal Mechanical Seal
4 4 O-ring O-ring
5 5 Fixing Plate for O-ring Fixing Plate for O-ring
6 6 Packing Packing
7 7 Impeller Impeller
8 8 Pin Pin
9 9 Cover Cover
Fig. 53 Fig. 53
84 84
E1CG4880210 E1CG4880210