Hoshizaki IM-240DME Service Manual page 50

[b] REMOVAL [b] REMOVAL
BRACKET COVER BRACKET COVER
Push the two Pawls and remove the Bracket Push the two Pawls and remove the Bracket
Cover. Cover.
SWITCH SWITCH
Pull out the Switch, holding the Rubber Leads Pull out the Switch, holding the Rubber Leads
Cap. Handle with care. Cap. Handle with care.
SWITCH ACTUATOR SWITCH ACTUATOR
Insert a flat blade screwdriver and wrench it Insert a flat blade screwdriver and wrench it
slightly to pull out the Switch Actuator. Handle slightly to pull out the Switch Actuator. Handle
with care to prevent damage to the cam surface with care to prevent damage to the cam surface
of the Actuator. of the Actuator.
DETECTOR DETECTOR
Push out the Detector, holding the Switch Push out the Detector, holding the Switch
Actuator. Actuator.
[c] REASSEMBLING [c] REASSEMBLING
SWITCH ACTUATOR SWITCH ACTUATOR
Insert the lower Shaft and push it along the U Insert the lower Shaft and push it along the U
Notch. Check that the Switch Actuator moves Notch. Check that the Switch Actuator moves
free. free.
SWITCH & BRACKET COVER SWITCH & BRACKET COVER
Place the Switch Lever first, and then attach the Place the Switch Lever first, and then attach the
Switch in position. Insert the guide and push the Switch in position. Insert the guide and push the
Bracket Cover to lock. Bracket Cover to lock.
46 46
Fig. 39 Fig. 39
E1CG4880210 E1CG4880210