Hoshizaki IM-240DME Service Manual page 98

16. SURGE ABSORBER 16. SURGE ABSORBER
1) Turn off the Control Switch or disconnect the power source. 1) Turn off the Control Switch or disconnect the power source.
2) Remove the Front Cover. 2) Remove the Front Cover.
3) Remove two screws at the front bottom of the Control Box, and remove the Control Box 3) Remove two screws at the front bottom of the Control Box, and remove the Control Box
Cover. Cover.
4) Remove the Quick Disconnect Terminal from the Surge Absorber. 4) Remove the Quick Disconnect Terminal from the Surge Absorber.
5) Remove the screw securing the Surge Absorber. 5) Remove the screw securing the Surge Absorber.
6) Remove the Surge Absorber. 6) Remove the Surge Absorber.
7) Install the new Surge Absorber in the reverse order of the removal procedure. 7) Install the new Surge Absorber in the reverse order of the removal procedure.
Note: Function of Surge Absorber Note: Function of Surge Absorber
By-passes a surge coming through the power supply line, caused by a thunderbolt, By-passes a surge coming through the power supply line, caused by a thunderbolt,
in order to protect the electronic components. in order to protect the electronic components.
Quick Disconnect Quick Disconnect
Terminal Terminal
Surge Absorber Surge Absorber
Fig. 57 Fig. 57
94 94
E1CG4880210 E1CG4880210