Hoshizaki IM-240DME Service Manual page 52

2) Wash the Bin liner, Ice Deflector and Door inner surface with a neutral non-abrasive cleaner. 2) Wash the Bin liner, Ice Deflector and Door inner surface with a neutral non-abrasive cleaner.
Rinse thoroughly with a clean cloth and fresh water. Rinse thoroughly with a clean cloth and fresh water.
3) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a suitable 3) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a suitable
container, or the recommended Hoshizaki sanitiser as directed. container, or the recommended Hoshizaki sanitiser as directed.
4) Soak a clean sponge or cloth with the solution, and wipe the Bin liner, Ice Deflector and 4) Soak a clean sponge or cloth with the solution, and wipe the Bin liner, Ice Deflector and
Door inner surface. Door inner surface.
5) Rinse thoroughly with fresh water and a clean cloth to wipe off the solution. Close the Bin 5) Rinse thoroughly with fresh water and a clean cloth to wipe off the solution. Close the Bin
Door. Door.
Note: Some solutions may cause damage to the Bin liner surfaces or corrosion on the Note: Some solutions may cause damage to the Bin liner surfaces or corrosion on the
metal parts. Always metal parts.
guidelines. guidelines.
[4] Air Filter (Air-Cooled Model Only) [4] Air Filter (Air-Cooled Model Only)
Plastic mesh Air Filters are fitted to remove dirt or dust from the air, preventing the Condenser Plastic mesh Air Filters are fitted to remove dirt or dust from the air, preventing the Condenser
from getting clogged. As the Filters become dirty, air circulation through the Condenser will from getting clogged. As the Filters become dirty, air circulation through the Condenser will
be reduced, affecting the icemaker's performance. be reduced, affecting the icemaker's performance.
Remove and clean the Air Filters at least twice per month: Remove and clean the Air Filters at least twice per month:
1) Unscrew and remove the Front Panel. The Filter is fitted on the inside of the panel behind 1) Unscrew and remove the Front Panel. The Filter is fitted on the inside of the panel behind
the air slots. the air slots.
2) Unscrew and remove the Louver on the Right Side Panel. The Filter is fitted to the inside 2) Unscrew and remove the Louver on the Right Side Panel. The Filter is fitted to the inside
of the plastic Louver. of the plastic Louver.
Note: Do not put your hand inside the machine compartment. Note: Do not put your hand inside the machine compartment.
3) Remove the Air Filters. 3) Remove the Air Filters.
4) Clean the Air Filters by using a vacuum cleaner. When severely clogged, use warm water 4) Clean the Air Filters by using a vacuum cleaner. When severely clogged, use warm water
and a neutral cleaner to wash the Air Filters. and a neutral cleaner to wash the Air Filters.
5) Rinse and dry the Air Filters thoroughly, and place them back in position. 5) Rinse and dry the Air Filters thoroughly, and place them back in position.
Right Side Panel Right Side Panel
Always rinse the sanitiser unless directed otherwise by Hoshizaki rinse the sanitiser unless directed otherwise by Hoshizaki
Air Filter Air Filter
Louver Louver
Fig. 40 Fig. 40
48 48
E1CG4880210 E1CG4880210