Charging The Battery Pack - Sony Handycam DCR-PC105 Operating Instructions Manual

Step 1 Preparing the power source

Charging the battery pack

Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (M series).
See page 216 for details of "InfoLITHIUM" battery pack.
(1) Install the battery pack on your camcorder.
(2) Connect the AC Adaptor supplied with your camcorder to the DC IN jack with
the v mark on the DC plug facing the grip belt.
(3) Connect the power cord to the AC Adaptor.
(4) Connect the power cord to a wall outlet.
(5) Set the POWER switch to OFF (CHG).
The CHARGE lamp lights up when charging begins. After charging is
completed, the CHARGE lamp goes out (full charge).
3
After charging the battery pack
Disconnect the AC Adaptor from the DC IN jack on your camcorder.
16
CHARGE lamp
2
5
1
POWER
LOCK