Searching For The Date Without Using Cassette Memory - Sony Handycam DCR-PC105 Operating Instructions Manual

Searching for a recording by date – Date search

Searching for the date without using Cassette Memory

The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select CM SEARCH in
(4) Select OFF, then press EXEC.
(5) Press SEARCH M. on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
(6) Press . on the Remote Commander to search for the previous date or press
> on the Remote Commander to search for the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press . or >, your camcorder searches for the previous or next date.
To cancel searching
Press x on the Remote Commander or
Note
If one day's recording is less than 2 minutes, your camcorder may not accurately find
the point where the recording date changes.
If the tape has a blank portion between recorded portions
Date search may not work correctly.
Cassette Memory
The cassette with Cassette Memory can hold 6 recording date data. If you search the
date among 7 or more data, see "Searching for the date without using Cassette
Memory."
.
, then press EXEC.
EXIT
CM SET
TITLE
TITLE ERASE
TITLE DSPL
CM SEARCH ON
OFF
TAPE TITLE
ERASE ALL
EXEC RET.
on your camcorder.
83